2" High Speed Bump
6' long sections
End caps sold separately
Textured surface helps traction
8 Cat Eye Reflectors for increased nighttime visibility
Performs well in extreme temperatures
Vulcanized rubber
Flexible, conforms to surface
Molded-in yellow synthetic rubber stripes won't degrade - 5 stripes per section
Use in heavy traffic areas
For speeds 20 mph or less - Slows traffic to less than 5 mph
Bottom drainage channels protect wire, hose, or pipe to 3/4” dia.
(4) hardware installation hole per 6' section - Install on asphalt or concrete - hardware sold separately
___________________________________
Speed Bumps, Speed Humps & End Caps:
___________________________________
Leave 1”- 3” between Speed Bumps for drainage and expansion.
Product can be cut with a utility knife if necessary.
Use both Adhesive & Hardware for installation under the following conditions:
- More than 4 trips per day with heavy trucks (e.g. garbage trucks).
- Installation on on an incline
- All Speed Hump installations
Caution:
- Not designed for speeds over 15 mph.
- Sweepers must raise brushes before driving over.
- Remove Speed Bumps and Speed Humps when snowplows are in use.